Inconel 625 Round Bars

ASTM B446 Inconel 625 Bright Bar, Inconel DIN 2.4856 Hex Bars, Inconel Alloy 625 Cold Finished Bars Suppliers in India. Inconel UNS N06625 Round Bars, Inconel Alloy 625 Flat Bar Exporter, Inconel 625 Square Bars Leading Manufacturers.

A.B. Stainless Steel is one of the largest exporter, manufacturer and supplier of Inconel 625 Round Bars in India.Alloy 625 Round Barsare oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, theseUNS N06625 Round Bars forms a thick, stable, passivating oxide layer protecting the surface from further attack. WNR 2.4856Round Bars retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies.

Meanwhile, Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

Inconel Alloy 625 Round Bars Specification

Specification : ASTM B 446 / ASME SB 446

Dimensions : ASTM, ASME and API

Size : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.

Length : 100 mm To 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Inconel 625 – UNS N06625

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Inconel 625 Round Bars conforms to NACE MR0175/ISO 15156

ASTM B446 Inconel 625 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	EN	OR
Inconel 625	2.4856	N06625	ХН75МБТЮ	NC22DNB4M	NCF 625	NA 21	NiCr22Mo9Nb	ЭИ602

Inconel Alloy 625 Round, Bright, Hex, Threaded Bar Chemical Composition

Grade

Ni

Cr

Fe

C

Mn

Si

Mo

Co

Al

Ti

Nb + Ta

P

S

Inconel 625

58.0 min

20.0 – 23.0

5.0 max

0.10 max

0.50 max

0.50 max

8.0 – 10.0

1.0 max

0.40 max

0.40 max

3.15 – 4.15

0.015 max

0.015 max

Nickel Alloy 625 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.4 g/cm3	1350 °C (2460 °F)	Psi – 135,000 , MPa – 930	Psi – 75,000 , MPa – 517	42.5 %

Types Of Available Products AISI, ASTM, DIN, ASME Inconel 625 Round Bars